910 D2 @ 44" and D3 sw possible?

Follow Thread

By Chris L

  • 0 Likes
  • 2 Replies
  1. Chris L

    Chris L
    Sun Prairie, WI

    I'm thinking about replacing my 909D2 finally.  I'm wondering if it's possible to get the following setup custom ordered:

    • 910 D2 9.5* head
    • Project X shaft
    • Standard 360* grip w/ 3 wraps of tape
    • Play at 44" and D3 swingweight.  

     

    Will they be able to swap out the head weights to hit that swingweight and length request?

  2. Lou G

    Lou G
    San Diego, CA

    Chris L said:

    I'm thinking about replacing my 909D2 finally.  I'm wondering if it's possible to get the following setup custom ordered:

    • 910 D2 9.5* head
    • Project X shaft
    • Standard 360* grip w/ 3 wraps of tape
    • Play at 44" and D3 swingweight.  

     

    Will they be able to swap out the head weights to hit that swingweight and length request?

    Assuming stock length is 45" and swingweight is D4 with standard 360 grip (52 grams). Cutting the shaft to 44 drops the swingweight 5-6 points. Adding 3 wraps of tape would drop it about 1 point (assuming 2g per wrap). To regain swingweight of 5 points you would have to add 10 grams to the head or deduct 25 grams from the grip weight. Or you could decrease grip weight by 10 grams and increase head weight by 6 grams. There are light weight grips made by Winn. Winn Excel RF is 43g in midsize. Winn Lite and Lite Dri Tac are 25 grams or so even in midsize. I played with a 44" driver between 2009-beginning of 2011 (G2). I had a Winn Excel RF grip on it and the swingweight was D0. I currently have a Burner HT Draw at 45" and swingweight is D1 with the Excel RF. There is a difference of 4 swingweight points between a Winn Excel RF midsize and a Lamkin Crossline midsize. There is also a possibility to do a combination of grip change and head weight change. Don't know if you like wrap grips (the Excel RF is a soft wrap grip). The Winn Lite comes in soft,medium or firm and is an ulralight rubber grip (you may want to get oversize).
  3. Cath D.

    Cath D.
    Carlsbad, CA

    Chris L said:

    I'm thinking about replacing my 909D2 finally.  I'm wondering if it's possible to get the following setup custom ordered:

    • 910 D2 9.5* head
    • Project X shaft
    • Standard 360* grip w/ 3 wraps of tape
    • Play at 44" and D3 swingweight.  

     

    Will they be able to swap out the head weights to hit that swingweight and length request?

    Hi Chris,

    We can swingweight your driver at a D1 with a PX 6.0 and a D2 with a PX 6.5 or 7.0.  If you add the Multi compound grip, we can get it at D2 and D3.  You can request a D2 swingweight with the standard grip and a D3 with a Multicompound and they will do their best.  

Please login to post a comment.

Sign In

Haven't registered for Team Titleist yet?

Sign Up