Golf Clubs - Recent Threads

Driver fitting for older drivers?

Jay C — Sun, 21 Jun 2026 15:39:09 GMT

I know this might sound a bit sacrilegious posting this right after the GTS release....but I'm wondering has anyone done a fitting with a Titleist rep for the current model driver, then taken the head/shaft specs and gone and sourced out something similar from a previous model or two? For example get fitted for a GTS but then go and find a comparable GT or even TSR? As much as I'd love to upgrade to a GTS...even factoring in the fitting fee the savings could potentially go towards a couple of new Vokey wedges in addition to adding a new driver to the bag

It seems like it's easy to find lots of good condition used heads and shafts, but just not the fitting component to go along with it unless you live near a 2nd Swing location.

GT280 Mini and TSi

David C — Thu, 18 Jun 2026 20:29:26 GMT

Over the years I have mostly played png drivers, Fairway metals, and hybrids. I have owned several Titleist fairway metals and had nice results with the 909F and 913lF. I had a Tiitleist Hybrid too after having success with the png G25. I had two separate bags for years, one I kept at our vacation home that we owned for almost 20 years. I have had Titleist MB irons since 2012 and played Vokey wedges for many years too. I just couldn't justify the expense of the Titleist driver and had so much success with my png i20 driver, fairway metals, and hybrids. I have always preferred smaller heads on my metals so when the GT280 Mini hit the market, I got tempted, but they were so much more money and I hit my png i20 so well. I had an opportunity to purchase a TSi fairway metal for my brother when I was visiting. I bought as a demo discount. I knew the shaft was too much flex for my brother, but I thought I would send him the stiff shaft from my 913F. I hit it before I purchased it and it felt very nice. Long story, made short, my brother never used the club and he mailed it to me for my birthday last year. I swapped to the shaft from the 913F and found it a great club off the tee on holes that required some precision targeting from the tee box and occasionally from the fairway on longer holes if I was trying to cover trouble or make up ground after a poorer drive. I also knew it was designed for use in the rough too. I loved it. I then followed up and bought a GT280 Mini and married it to a low flighted shaft. I tried the GT280 using the shaft from my 913F, but the flight was too high for me. I had played a png G2 7 degree or a png i20 8.5 degree driver for years. After getting the correct Titleist tip installed and using it last fall and now this spring, I am sold on both the TSi and the GT280 Mini. Very consistent and even though I give up a bit on length on my GT280 Mini drives, I get better misses. I love the sound of both clubs because I realize that they sound more like my old Persimmon gear from some 50 years ago.

C-16

Jeff D — Sun, 14 Jun 2026 17:28:52 GMT

Would it make sense to re-shaft my C-16’s that are about 10 years old?

GTS3 Sliding Weight Cover

Scott A — Fri, 12 Jun 2026 00:33:31 GMT

Hi everyone. I just bought a GTS3 driver and I was trying to open the sliding weight cover and one of the tabs got stuck. I messed with it for a while and ended up breaking one of the tabs and messing up the screw.

Does anyone know where I can get a replacement cover and screw?

www.titleist.com/.../pvta2s25yhrtkctyoutj www.titleist.com/.../rv1ugsq2hurgzl3u1rn1

Thank You Everyone Buying GTS Drivers!!

J22abe — Thu, 11 Jun 2026 21:58:34 GMT

...because of all of you I'm finally back in a Titleist Driver.

(No, you will never get me in a Scotty over my putter!!! NEVAH!)

www.titleist.com/.../kfkq1wzg0mvgjvmzfs8e

GTS delivery time

craig t — Thu, 11 Jun 2026 18:21:18 GMT

So I went for my fitting for GTS driver and fairway woods. Ended up ordering GTS4 driver, GTS2 3 wood, GTS3 5 and 7 wood. Ordered 3 weeks now and still no sign, see shops now have them in, a bit gutted not to have received them yet. Anyone else finding the same?

GTS driver

jbryant — Thu, 11 Jun 2026 13:34:22 GMT

After Titleist fitting I changed to the new GTS with an Ultra shaft. I am a 77 Y O 14 handicap player and gain 15 to 20 yards of fthe tee. Just as or more accurate them my old TM 2 year old driver. Very happy with the purchase. John B

When to switch to hybrids

Eric B — Thu, 11 Jun 2026 13:22:54 GMT

Aging (50) has me considering getting rid of the traditional 3 and 4 iron. I have been playing a hybrid for these clubs and I really like it. Just kind of stings a little when you make the switch. I hit the hybrid much better though. Pride goes out the window if I save a few shots on the course.

3 wood

Jun Sung P — Wed, 10 Jun 2026 15:05:33 GMT

I've been hitting my G425 lst 3 wood for years and every year I want to change it to a titleist I just can't seem to find one that I feel comfortable with for some reason, and its honestly not sure what to do cause the 3 wood I have is getting kinda old

GTS hybrids

Tue, 09 Jun 2026 01:43:14 GMT

When will new hybrids be out ?

GTS2’s Have arrived!!

Mike r — Fri, 05 Jun 2026 14:10:52 GMT

It's been 10 years since I have been fit. I am so happy with fitting, live the ball flight and extra distance. I hit the GTS2 driver with 10 degree head and i love the higher launch angle. I also received a GTS2 16.5 degree fairway wood and the ball comes off the face like a missle. Thanks Titleist for the great fitting and experience. #TeamTitleis

www.titleist.com/.../wf18tdxcioxxx1zquiac www.titleist.com/.../jfapdvwayiitflicrjxr www.titleist.com/.../bgjbg1ezsjnxqqnrfj4t

My mew T250’s!!

LGuzman — Thu, 04 Jun 2026 17:37:11 GMT

Got fitted with Adam Lash at Breakers West a couple of weeks ago. Incredible experience with all of his fitting knowledge and techniques.

Just got them this morning and I can’t wait to try them out! Definitely taking them to Casa de Campo next week!!

www.titleist.com/.../dctr2cene7pdugep2tly

620MB PW/ Vokey GW Transition

GDua — Thu, 04 Jun 2026 16:00:29 GMT

Hey Team Titleist. Been gaming a set of srxn ZX7 for a handful of years and looking to get back into some more traditional blades. ZX7 are fine but they're a bit chunky for my liking (particularly in the short irons) and launch a bit high -- I've always struggled in the wind and prefer something that helps me flight the ball like a blade.

My questions is related to the blade length of the 620MB PW. I've always played a set PW vs. a Vokey, and I know the 620s obviously have a compact look, but one thing that drives me nuts is when the set PW is way shorter heal to toe than my GW (I play a Vokey 52). Just feels odd for the profile to get smaller as I transition up the bag.

Anyone gaming 620MBs and a Vokey GW and have any insight into the size comparison? I'd imagine Titleist has thought of this but wanted to confirm before pulling the trigger. Thanks!

New Driver

Alan p — Thu, 04 Jun 2026 11:51:15 GMT

Had a message yesterday from precision golf in surrey, UK that my new GTS2 is ready for collection, cannot wait to get it out on the course.

T100 custom order came in at D0 & C9 swing weight

richard a — Wed, 03 Jun 2026 23:50:22 GMT

I’ve been playing and building clubs for a long time, and in my experience a standard swing weight for a player’s iron set is typically around D2.

About a month ago I received a custom set of T100 irons with Modus Tour 120 Stiff shafts, standard length. The entire set measured approximately D0.

I also ordered a custom U•250 Utility Iron with a Graphite Design DI-105 shaft. It arrived at C9.

I reached out to Titleist Customer Service because both orders seemed noticeably lighter than expected. Their response was:

“The Utility iron is targeted at D0, but the lightest it can go is C9 and the heaviest is D1. So, it is calculated within the threshold.”

I understand there are manufacturing tolerances and that different shafts and grips can influence swing weight. However, I was surprised that a custom order could arrive at the absolute bottom end of the allowable range and still be considered fully within spec.

Has anyone else experienced this with recent custom Titleist orders? I’d also be interested to hear from someone at Titleist regarding what swing weight target is typically used for T100 irons with Modus 120 shafts and whether D0 would be considered normal for that build.

I’ve always had great experiences with Titleist products, which is why this response was a bit disappointing.

T200 Real or Fake

Kyle V — Tue, 02 Jun 2026 23:38:05 GMT

I just bought these Titleist second hand and there are some red flags- the quality seems off - the back plates feel loose (not what I would expect from Titleist) and I was looking for the serial number. It looks like the font is off and it’s on the 7i. Can anyone help? Thanks!

www.titleist.com/.../i95f6nzehsca0ztwm9hj www.titleist.com/.../kqmeswuad37hvcnqe9rm www.titleist.com/.../njl07vazshbphcsfhzqk

Fake GT2? How can I find out if I purchased a fake?

BRIAN B — Tue, 02 Jun 2026 12:38:19 GMT

Just purchased a used Titleist GT2 Driver from a PGA professional online (I checked his credentials) but still have a sinking feeling I purchased a fake/dupe. Is there a contact e-mail, phone number, online portal I can use to find out and confirm if it is fake or not?

Best Starter clubs

Ronald D — Sat, 30 May 2026 13:43:35 GMT

What would be the best clubs to get as a starter

Counterfeit T100’s?

Chris M — Sat, 30 May 2026 10:02:47 GMT

Is this normal? Purchased and concerned about authenticity.

4 iron is the only club in the set with serial number. Font looks off. Tag says the club heads were made in Taiwan?

www.titleist.com/.../z2bcxtvuyos8suhqjksp www.titleist.com/.../phmqwqddkdnnyxqmudgm www.titleist.com/.../otdnovgfsvqtmsdmb1xq www.titleist.com/.../h1imunbsy4czjgdo3b7w

GTS4 has arrived

Joey L — Fri, 29 May 2026 04:01:45 GMT

Picked up my GTS4 today from my fitter. Can wait to put it through its paces tomorrow.

Moved from a GT2. Loved that club, but the fitting experience wasn’t great, and the shaft wasn’t nearly beefy enough.

2023 T200 Iron Backing Plate

PLuckins — Thu, 28 May 2026 09:46:10 GMT

Hey,

about a year and a half ago I purchased some t200 irons for around £1.2k, last week I noticed mid round that the backing plate on my 7 iron had fallen off. I've not been able to locate the backing plate so my 7 iron is left looking a state.

First of all I think it's crazy that irons are falling apart after 1.5 years, especially at the price tag Titleist put on their clubs. Second, one quick google and it appear this backing plate has been problematic for Titleist for the t200 and t350 models.

I've tried contacting support a couple of times and I've heard nothing back, this is very disappointing because you're unable to buy a replacement backing plate anywhere.

Really my options are, buy a whole replacement 7 iron and pray none of the other backing plates fall off and get lost, or buy new irons and get a low trade in on mine.

As a long term Titleist customer, I'm very disappointed.

Upgraded 910 D2 to GTS 2

Joseph R — Wed, 27 May 2026 15:45:26 GMT

Just ordered my GTS 2 after multiple fittings and testing. Upgrading from a 910 D2! So far, it's given me about a 7 mph uptick in ball speed and 10-15 more yards of carry. The dispersion is great too. I was in the A1 setting in the 910 but I play the driver further back than I should and it is spinnier, about 3500, but "most" everything was in the fairway. Went to the A3 setting in the GTS 2, got my spin down to 2400-2500 average. Shaft also went from the Aldila RIP shaft 60 2.9 stiff to the Tensei 1K pro red. Little lighter and lower kick point to help me square up the face. I did like the new Titan shaft in a 60g stiff and got a little more distance, but the impact feel, sound and dispersion from the Tensei were just a little better, even as I got tired. I did a fitting, then went to another store and tested it out against the QI4D and got kicked out of one bay, moved to an indoor trackman bay and spent another hour in there. Clearly I am picky and need to make 100% sure it's the right move after 15 years. Can't wait to get it out on the course!

Headcover numbers

RBadgley — Wed, 27 May 2026 00:15:44 GMT

How can I get the numbers for the head covers? Just want my 3 wood to have the number 3.

GT2

RBadgley — Tue, 26 May 2026 15:47:13 GMT

Just received my GT2 7wood!! First change from the TSR line. I’m excited to hit it today!! Hoping to see it stick on greens!!

GTS Fairways

John B — Tue, 26 May 2026 12:19:45 GMT

Assuming the GTS one fairways will be similar to the twos and threes. I wonder how big a difference the technology will be? Currently play the TSR1 18* fairway. I love it off the tee box but cannot hit it off the grass. Have considered a GT1, especially with the lower price, but may be better to wait it out for the GTS1. Opinions?